Patches contributed by Eötvös Lorand University
commit 0c81b2a1448bc6a2a9b2d6469fb0669fb4b25e5b
Merge: 0729fbf3bc70 70ff05554f91
Author: Ingo Molnar <mingo@elte.hu>
Date: Fri Jul 11 10:46:50 2008 +0200
Merge branch 'linus' into core/rcu
Conflicts:
include/linux/rculist.h
kernel/rcupreempt.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --cc kernel/rcupreempt.c
index 396b121edfe5,41d275a81df5..536ce83c55fe
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@@ -1056,42 -925,23 +1056,38 @@@ void rcu_offline_cpu(int cpu
spin_unlock_irqrestore(&rdp->lock, flags);
}
- void __devinit rcu_online_cpu(int cpu)
+ #else /* #ifdef CONFIG_HOTPLUG_CPU */
+
+ void rcu_offline_cpu(int cpu)
+ {
+ }
+
+ #endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
+
+ void __cpuinit rcu_online_cpu(int cpu)
{
unsigned long flags;
+ struct rcu_data *rdp;
spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags);
cpu_set(cpu, rcu_cpu_online_map);
spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
+
+ /*
+ * The rcu_sched grace-period processing might have bypassed
+ * this CPU, given that it was not in the rcu_cpu_online_map
+ * when the grace-period scan started. This means that the
+ * grace-period task might sleep. So make sure that if this
+ * should happen, the first callback posted to this CPU will
+ * wake up the grace-period task if need be.
+ */
+
+ rdp = RCU_DATA_CPU(cpu);
+ spin_lock_irqsave(&rdp->lock, flags);
+ rdp->rcu_sched_sleeping = 1;
+ spin_unlock_irqrestore(&rdp->lock, flags);
}
- #else /* #ifdef CONFIG_HOTPLUG_CPU */
-
- void rcu_offline_cpu(int cpu)
- {
- }
-
- void __devinit rcu_online_cpu(int cpu)
- {
- }
-
- #endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
-
static void rcu_process_callbacks(struct softirq_action *unused)
{
unsigned long flags;
commit 39415a440ecceb0a5bd3c23686f18f83bb8368c6
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 20:06:30 2008 +0200
x86, VisWS: fix pci_direct_conf1 dependency
fix:
arch/x86/pci/built-in.o: In function `pci_subsys_init':
visws.c:(.init.text+0xfc5): undefined reference to `pci_direct_conf1'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b03018692cd8..2cfccc987a26 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -353,7 +353,7 @@ endchoice
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
- depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE
+ depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
help
The SGI Visual Workstation series is an IA32-based workstation
based on SGI systems chips with some legacy PC hardware attached.
commit c47277d2f842d6c50d1991579307625540b26eac
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 19:47:49 2008 +0200
x86, VisWS: build fix
fix:
arch/x86/kernel/built-in.o: In function `visws_early_detect':
: undefined reference to `mach_get_smp_config_quirk'
arch/x86/kernel/built-in.o: In function `visws_early_detect':
: undefined reference to `mach_find_smp_config_quirk'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1765714176d4..b03018692cd8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -353,7 +353,7 @@ endchoice
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
- depends on X86_32 && PCI && !X86_VOYAGER
+ depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE
help
The SGI Visual Workstation series is an IA32-based workstation
based on SGI systems chips with some legacy PC hardware attached.
commit f78cb9b1cfe618e8b4cc0c118f187f54ed102f45
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 19:39:55 2008 +0200
x86, VisWS: build fix
fix:
arch/x86/kernel/visws_quirks.c: In function ‘visws_early_detect’:
arch/x86/kernel/visws_quirks.c:293: error: ‘no_broadcast’ undeclared (first use in this function)
arch/x86/kernel/visws_quirks.c:293: error: (Each undeclared identifier is reported only once
arch/x86/kernel/visws_quirks.c:293: error: for each function it appears in.)
make[1]: *** [arch/x86/kernel/visws_quirks.o] Error 1
make: *** [arch/x86/kernel/visws_quirks.o] Error 2
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 5c715c24ab55..e94bdb6add1d 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -57,6 +57,8 @@
#include <linux/pci.h>
#include <linux/pci_ids.h>
+extern int no_broadcast;
+
#include <asm/io.h>
#include <asm/apic.h>
#include <asm/arch_hooks.h>
commit b6770c83b4b88dd832cc77916b1935b0311c64e0
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 19:37:44 2008 +0200
x86, VisWS: do not allow VisWS for Voyager
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 24ff43a2ca56..1765714176d4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -353,7 +353,7 @@ endchoice
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
- depends on X86_32 && PCI
+ depends on X86_32 && PCI && !X86_VOYAGER
help
The SGI Visual Workstation series is an IA32-based workstation
based on SGI systems chips with some legacy PC hardware attached.
commit 8a55a00aad9f5c4e9bb97729b42a7ceea2a3b6fb
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 19:35:33 2008 +0200
x86, VisWS: turn into generic arch, update include file change
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c
index 2c5aaa58046d..dcbb3f739e61 100644
--- a/sound/oss/vwsnd.c
+++ b/sound/oss/vwsnd.c
@@ -150,7 +150,7 @@
#include <linux/interrupt.h>
#include <linux/mutex.h>
-#include <asm/mach-visws/cobalt.h>
+#include <asm/visws/cobalt.h>
#include "sound_config.h"
commit 15e551d25e5a600c76cb92171357d4cbe2d1bf7a
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 17:02:10 2008 +0200
x86, VisWS: turn into generic arch, eliminate Kconfig specials
remove leftover traces of various VISWS related Kconfig specials.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 964dfa36d367..c70e12b1a637 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -3,7 +3,7 @@ config LGUEST_GUEST
select PARAVIRT
depends on X86_32
depends on !X86_PAE
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on !X86_VOYAGER
select VIRTIO
select VIRTIO_RING
select VIRTIO_CONSOLE
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index b8054c3ffce3..48278fa7d3de 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -81,7 +81,7 @@ void __init intr_init_hook(void)
*
* Description:
* generally used to activate any machine specific identification
- * routines that may be needed before setup_arch() runs. On VISWS
+ * routines that may be needed before setup_arch() runs. On Voyager
* this is used to get the board revision and type.
**/
void __init pre_setup_arch_hook(void)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 860f15f36ce9..bba867391a85 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -4,7 +4,6 @@
menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
- depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
depends on PCI
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 6b8dbb9ba73b..76f2b36881c3 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
config LGUEST
tristate "Linux hypervisor example code"
- depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX && !(X86_VISWS || X86_VOYAGER)
+ depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX && !X86_VOYAGER
select HVC_DRIVER
---help---
This is a very simple module which allows you to run
commit 62fa572f6933038b3d79558812de88702bda176f
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 16:45:50 2008 +0200
x86, VisWS: turn into generic arch, remove leftover files
remove leftover arch/x86/mach-visws/* files.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index ce04b031f68b..919ce21ea654 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -113,10 +113,6 @@ mcore-y := arch/x86/mach-default/
mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/
-# VISWS subarch support
-#mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
-#mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/
-
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
diff --git a/arch/x86/mach-visws/Makefile b/arch/x86/mach-visws/Makefile
deleted file mode 100644
index 7469df1340c1..000000000000
--- a/arch/x86/mach-visws/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := setup.o setup_visws.o traps.o
-
-obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
diff --git a/arch/x86/mach-visws/setup.c b/arch/x86/mach-visws/setup.c
deleted file mode 100644
index b8054c3ffce3..000000000000
--- a/arch/x86/mach-visws/setup.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Machine specific setup for generic
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/acpi.h>
-#include <asm/arch_hooks.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-/*
- * Any quirks to be performed to initialize timers/irqs/etc?
- */
-int (*arch_time_init_quirk)(void);
-int (*arch_pre_intr_init_quirk)(void);
-int (*arch_intr_init_quirk)(void);
-int (*arch_trap_init_quirk)(void);
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI (1)
-#else
-#define DEFAULT_SEND_IPI (0)
-#endif
-
-int no_broadcast=DEFAULT_SEND_IPI;
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
- if (arch_pre_intr_init_quirk) {
- if (arch_pre_intr_init_quirk())
- return;
- }
- init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- * Fill in any interrupts that may have been left out by the general
- * init_IRQ() routine. interrupts having to do with the machine rather
- * than the devices on the I/O bus (like APIC interrupts in intel MP
- * systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
- if (arch_intr_init_quirk) {
- if (arch_intr_init_quirk())
- return;
- }
-#ifdef CONFIG_X86_LOCAL_APIC
- apic_intr_init();
-#endif
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- * generally used to activate any machine specific identification
- * routines that may be needed before setup_arch() runs. On VISWS
- * this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- * Called as the final act of trap_init(). Used in VISWS to initialise
- * the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
- if (arch_trap_init_quirk) {
- if (arch_trap_init_quirk())
- return;
- }
-}
-
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
- .mask = CPU_MASK_NONE,
- .name = "timer"
-};
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- * Must plug the system timer interrupt source at HZ into the IRQ listed
- * in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
- if (arch_time_init_quirk) {
- /*
- * A nonzero return code does not mean failure, it means
- * that the architecture quirk does not want any
- * generic (timer) setup to be performed after this:
- */
- if (arch_time_init_quirk())
- return;
- }
-
- irq0.mask = cpumask_of_cpu(0);
- setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- * along the MCA bus. Use this to hook into that chain if you will need
- * it.
- **/
-void mca_nmi_hook(void)
-{
- /* If I recall correctly, there's a whole bunch of other things that
- * we can do to check for NMI problems, but that's all I know about
- * at the moment.
- */
-
- printk("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
- get_option(&str, &no_broadcast);
- printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
- "IPI Broadcast");
- return 1;
-}
-
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
- printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
- "Shortcut");
- return 0;
-}
-
-late_initcall(print_ipi_mode);
-
diff --git a/arch/x86/mach-visws/setup_visws.c b/arch/x86/mach-visws/setup_visws.c
deleted file mode 100644
index e95e9499c8cd..000000000000
--- a/arch/x86/mach-visws/setup_visws.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Unmaintained SGI Visual Workstation support.
- * Split out from setup.c by davej@suse.de
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/visws/cobalt.h>
-#include <asm/visws/piix4.h>
-#include <asm/arch_hooks.h>
-#include <asm/fixmap.h>
-#include <asm/reboot.h>
-#include <asm/setup.h>
-#include <asm/e820.h>
-#include <asm/smp.h>
-#include <asm/io.h>
-
-#include <mach_ipi.h>
-
-#include "mach_apic.h"
-
-#include <linux/init.h>
-#include <linux/smp.h>
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-int is_visws_box(void)
-{
- return visws_board_type >= 0;
-}
-
-static int __init visws_time_init_quirk(void)
-{
- printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
- /* Set the countdown value */
- co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
- /* Start the timer */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
- /* Enable (unmask) the timer interrupt */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
- /*
- * Zero return means the generic timer setup code will set up
- * the standard vector:
- */
- return 0;
-}
-
-static int __init visws_pre_intr_init_quirk(void)
-{
- init_VISWS_APIC_irqs();
-
- /*
- * We dont want ISA irqs to be set up by the generic code:
- */
- return 1;
-}
-
-/* Quirk for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-static char * __init visws_memory_setup_quirk(void)
-{
- long long gfx_mem_size = 8 * MB;
-
- mem_size = boot_params.alt_mem_k;
-
- if (!mem_size) {
- printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
- mem_size = 128 * MB;
- }
-
- /*
- * this hardcodes the graphics memory to 8 MB
- * it really should be sized dynamically (or at least
- * set as a boot param)
- */
- if (!sgivwfb_mem_size) {
- printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
- sgivwfb_mem_size = 8 * MB;
- }
-
- /*
- * Trim to nearest MB
- */
- sgivwfb_mem_size &= ~((1 << 20) - 1);
- sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
- e820_add_region(0, LOWMEMSIZE(), E820_RAM);
- e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
- e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
- return "PROM";
-}
-
-static void visws_machine_emergency_restart(void)
-{
- /*
- * Visual Workstations restart after this
- * register is poked on the PIIX4
- */
- outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-static void visws_machine_power_off(void)
-{
- unsigned short pm_status;
-/* extern unsigned int pci_bus0; */
-
- while ((pm_status = inw(PMSTS_PORT)) & 0x100)
- outw(pm_status, PMSTS_PORT);
-
- outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
- mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
- (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
- outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-static int __init visws_get_smp_config_quirk(unsigned int early)
-{
- /*
- * Prevent MP-table parsing by the generic code:
- */
- return 1;
-}
-
-extern unsigned int __cpuinitdata maxcpus;
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info (struct mpc_config_processor *m)
-{
- int ver, logical_apicid;
- physid_mask_t apic_cpus;
-
- if (!(m->mpc_cpuflag & CPU_ENABLED))
- return;
-
- logical_apicid = m->mpc_apicid;
- printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
- m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
-
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
- boot_cpu_physical_apicid = m->mpc_apicid;
-
- ver = m->mpc_apicver;
- if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
- printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->mpc_apicid, MAX_APICS);
- return;
- }
-
- apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- m->mpc_apicid);
- ver = 0x10;
- }
- apic_version[m->mpc_apicid] = ver;
-}
-
-int __init visws_find_smp_config_quirk(unsigned int reserve)
-{
- struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
- unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
- if (ncpus > CO_CPU_MAX) {
- printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
- ncpus, mp);
-
- ncpus = CO_CPU_MAX;
- }
-
- if (ncpus > maxcpus)
- ncpus = maxcpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- smp_found_config = 1;
-#endif
- while (ncpus--)
- MP_processor_info(mp++);
-
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- return 1;
-}
-
-extern int visws_trap_init_quirk(void);
-
-void __init visws_early_detect(void)
-{
- int raw;
-
- visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
- >> PIIX_GPI_BD_SHIFT;
-
- if (visws_board_type < 0)
- return;
-
- /*
- * Install special quirks for timer, interrupt and memory setup:
- */
- arch_time_init_quirk = visws_time_init_quirk;
- arch_pre_intr_init_quirk = visws_pre_intr_init_quirk;
- arch_memory_setup_quirk = visws_memory_setup_quirk;
-
- /*
- * Fall back to generic behavior for traps:
- */
- arch_intr_init_quirk = NULL;
- arch_trap_init_quirk = visws_trap_init_quirk;
-
- /*
- * Install reboot quirks:
- */
- pm_power_off = visws_machine_power_off;
- machine_ops.emergency_restart = visws_machine_emergency_restart;
-
- /*
- * Do not use broadcast IPIs:
- */
- no_broadcast = 0;
-
- /*
- * Override generic MP-table parsing:
- */
- mach_get_smp_config_quirk = visws_get_smp_config_quirk;
- mach_find_smp_config_quirk = visws_find_smp_config_quirk;
-
- /*
- * Get Board rev.
- * First, we have to initialize the 307 part to allow us access
- * to the GPIO registers. Let's map them at 0x0fc0 which is right
- * after the PIIX4 PM section.
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable GPIO registers. */
-
- /*
- * Now, we have to map the power management section to write
- * a bit which enables access to the GPIO registers.
- * What lunatic came up with this shit?
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable PM registers. */
-
- /*
- * Now, write the PM register which enables the GPIO registers.
- */
- outb_p(SIO_PM_FER2, SIO_PM_INDEX);
- outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
- /*
- * Now, initialize the GPIO registers.
- * We want them all to be inputs which is the
- * power on default, so let's leave them alone.
- * So, let's just read the board rev!
- */
- raw = inb_p(SIO_GP_DATA1);
- raw &= 0x7f; /* 7 bits of valid board revision ID. */
-
- if (visws_board_type == VISWS_320) {
- if (raw < 0x6) {
- visws_board_rev = 4;
- } else if (raw < 0xc) {
- visws_board_rev = 5;
- } else {
- visws_board_rev = 6;
- }
- } else if (visws_board_type == VISWS_540) {
- visws_board_rev = 2;
- } else {
- visws_board_rev = raw;
- }
-
- printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
- (visws_board_type == VISWS_320 ? "320" :
- (visws_board_type == VISWS_540 ? "540" :
- "unknown")), visws_board_rev);
-}
diff --git a/arch/x86/mach-visws/traps.c b/arch/x86/mach-visws/traps.c
deleted file mode 100644
index e5e6492c2676..000000000000
--- a/arch/x86/mach-visws/traps.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* VISWS traps */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/arch_hooks.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
- set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
- set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
- if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
- li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
- /*
- * On normal SMP PC this is used only with SMP, but we have to
- * use it and set it up here to start the Cobalt clock
- */
- set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
- setup_local_APIC();
- printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
- (unsigned int)apic_read(APIC_LVR),
- (unsigned int)apic_read(APIC_ID));
-
- set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
- set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
- printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
- co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
- /* Enable Cobalt APIC being careful to NOT change the ID! */
- co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
- printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
- co_apic_read(CO_APIC_ID));
-}
-
-int __init visws_trap_init_quirk(void)
-{
- lithium_init();
- cobalt_init();
-
- return 1;
-}
diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
deleted file mode 100644
index 6c02c8d09932..000000000000
--- a/arch/x86/mach-visws/visws_apic.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- * SGI Visual Workstation interrupt controller
- *
- * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- * which serves as the main interrupt controller in the system. Non-legacy
- * hardware in the system uses this controller directly. Legacy devices
- * are connected to the PIIX4 which in turn has its 8259(s) connected to
- * a of the Cobalt APIC entry.
- *
- * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/cobalt.h>
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
- co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
- co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
- extern char visws_board_type;
- extern char visws_board_rev;
-
- if (visws_board_type == VISWS_320 && visws_board_rev == 5)
- return 5;
- return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
- if (IS_CO_APIC(irq))
- return CO_APIC(irq);
-
- switch (irq) {
- case 0: return CO_APIC_CPU;
- case CO_IRQ_IDE0: return co_apic_ide0_hack();
- case CO_IRQ_IDE1: return CO_APIC_IDE1;
- default: return -1;
- }
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-
-static void enable_cobalt_irq(unsigned int irq)
-{
- co_apic_set(is_co_apic(irq), irq);
-}
-
-static void disable_cobalt_irq(unsigned int irq)
-{
- int entry = is_co_apic(irq);
-
- co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
- co_apic_read(CO_APIC_LO(entry));
-}
-
-/*
- * "irq" really just serves to identify the device. Here is where we
- * map this to the Cobalt APIC entry where it's physically wired.
- * This is called via request_irq -> setup_irq -> irq_desc->startup()
- */
-static unsigned int startup_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
- irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
- return 0;
-}
-
-static void ack_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- disable_cobalt_irq(irq);
- apic_write(APIC_EOI, APIC_EIO_ACK);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static void end_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
- .typename = "Cobalt-APIC",
- .startup = startup_cobalt_irq,
- .shutdown = disable_cobalt_irq,
- .enable = enable_cobalt_irq,
- .disable = disable_cobalt_irq,
- .ack = ack_cobalt_irq,
- .end = end_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(unsigned int irq)
-{
- init_8259A(0);
-
- return startup_cobalt_irq(irq);
-}
-
-static void end_piix4_master_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip piix4_master_irq_type = {
- .typename = "PIIX4-master",
- .startup = startup_piix4_master_irq,
- .ack = ack_cobalt_irq,
- .end = end_piix4_master_irq,
-};
-
-
-static struct irq_chip piix4_virtual_irq_type = {
- .typename = "PIIX4-virtual",
- .shutdown = disable_8259A_irq,
- .enable = enable_8259A_irq,
- .disable = disable_8259A_irq,
-};
-
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
- int realirq;
- irq_desc_t *desc;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
-
- /* Find out what's interrupting in the PIIX4 master 8259 */
- outb(0x0c, 0x20); /* OCW3 Poll command */
- realirq = inb(0x20);
-
- /*
- * Bit 7 == 0 means invalid/spurious
- */
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq &= 7;
-
- if (unlikely(realirq == 2)) {
- outb(0x0c, 0xa0);
- realirq = inb(0xa0);
-
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq = (realirq & 7) + 8;
- }
-
- /* mask and ack interrupt */
- cached_irq_mask |= 1 << realirq;
- if (unlikely(realirq > 7)) {
- inb(0xa1);
- outb(cached_slave_mask, 0xa1);
- outb(0x60 + (realirq & 7), 0xa0);
- outb(0x60 + 2, 0x20);
- } else {
- inb(0x21);
- outb(cached_master_mask, 0x21);
- outb(0x60 + realirq, 0x20);
- }
-
- spin_unlock_irqrestore(&i8259A_lock, flags);
-
- desc = irq_desc + realirq;
-
- /*
- * handle this 'virtual interrupt' as a Cobalt one now.
- */
- kstat_cpu(smp_processor_id()).irqs[realirq]++;
-
- if (likely(desc->action != NULL))
- handle_IRQ_event(realirq, desc->action);
-
- if (!(desc->status & IRQ_DISABLED))
- enable_8259A_irq(realirq);
-
- return IRQ_HANDLED;
-
-out_unlock:
- spin_unlock_irqrestore(&i8259A_lock, flags);
- return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
- .handler = piix4_master_intr,
- .name = "PIIX4-8259",
-};
-
-static struct irqaction cascade_action = {
- .handler = no_action,
- .name = "cascade",
-};
-
-
-void init_VISWS_APIC_irqs(void)
-{
- int i;
-
- for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
-
- if (i == 0) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_IDE0) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_IDE1) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_8259) {
- irq_desc[i].chip = &piix4_master_irq_type;
- }
- else if (i < CO_IRQ_APIC0) {
- irq_desc[i].chip = &piix4_virtual_irq_type;
- }
- else if (IS_CO_APIC(i)) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- }
-
- setup_irq(CO_IRQ_8259, &master_action);
- setup_irq(2, &cascade_action);
-}
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index c03c2094864f..e515e8db842a 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -9,8 +9,6 @@ pci-y := fixup.o
pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
-# Careful: VISWS overrule the pci-y above. The colons are
-# therefor correct. This needs a proper fix by distangling the code.
pci-$(CONFIG_X86_VISWS) += visws.o
pci-$(CONFIG_X86_NUMAQ) += numa.o
commit 26dd9fcfc2abc298e3c60597bbe6405826aabf91
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 16:21:38 2008 +0200
x86, VisWS: turn into generic arch, clean up
merge traps_visws.c and apic_visws.c into visws_quirks.c.
(no code changed)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 2ef0fbd3488f..f77dd6774bba 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -19,7 +19,7 @@ obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
obj-y += setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
-obj-$(CONFIG_X86_VISWS) += visws_quirks.o traps_visws.o apic_visws.o
+obj-$(CONFIG_X86_VISWS) += visws_quirks.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
diff --git a/arch/x86/kernel/apic_visws.c b/arch/x86/kernel/apic_visws.c
deleted file mode 100644
index 6c02c8d09932..000000000000
--- a/arch/x86/kernel/apic_visws.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- * SGI Visual Workstation interrupt controller
- *
- * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- * which serves as the main interrupt controller in the system. Non-legacy
- * hardware in the system uses this controller directly. Legacy devices
- * are connected to the PIIX4 which in turn has its 8259(s) connected to
- * a of the Cobalt APIC entry.
- *
- * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/cobalt.h>
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
- co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
- co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
- extern char visws_board_type;
- extern char visws_board_rev;
-
- if (visws_board_type == VISWS_320 && visws_board_rev == 5)
- return 5;
- return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
- if (IS_CO_APIC(irq))
- return CO_APIC(irq);
-
- switch (irq) {
- case 0: return CO_APIC_CPU;
- case CO_IRQ_IDE0: return co_apic_ide0_hack();
- case CO_IRQ_IDE1: return CO_APIC_IDE1;
- default: return -1;
- }
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-
-static void enable_cobalt_irq(unsigned int irq)
-{
- co_apic_set(is_co_apic(irq), irq);
-}
-
-static void disable_cobalt_irq(unsigned int irq)
-{
- int entry = is_co_apic(irq);
-
- co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
- co_apic_read(CO_APIC_LO(entry));
-}
-
-/*
- * "irq" really just serves to identify the device. Here is where we
- * map this to the Cobalt APIC entry where it's physically wired.
- * This is called via request_irq -> setup_irq -> irq_desc->startup()
- */
-static unsigned int startup_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
- irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
- return 0;
-}
-
-static void ack_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- disable_cobalt_irq(irq);
- apic_write(APIC_EOI, APIC_EIO_ACK);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static void end_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
- .typename = "Cobalt-APIC",
- .startup = startup_cobalt_irq,
- .shutdown = disable_cobalt_irq,
- .enable = enable_cobalt_irq,
- .disable = disable_cobalt_irq,
- .ack = ack_cobalt_irq,
- .end = end_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(unsigned int irq)
-{
- init_8259A(0);
-
- return startup_cobalt_irq(irq);
-}
-
-static void end_piix4_master_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip piix4_master_irq_type = {
- .typename = "PIIX4-master",
- .startup = startup_piix4_master_irq,
- .ack = ack_cobalt_irq,
- .end = end_piix4_master_irq,
-};
-
-
-static struct irq_chip piix4_virtual_irq_type = {
- .typename = "PIIX4-virtual",
- .shutdown = disable_8259A_irq,
- .enable = enable_8259A_irq,
- .disable = disable_8259A_irq,
-};
-
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
- int realirq;
- irq_desc_t *desc;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
-
- /* Find out what's interrupting in the PIIX4 master 8259 */
- outb(0x0c, 0x20); /* OCW3 Poll command */
- realirq = inb(0x20);
-
- /*
- * Bit 7 == 0 means invalid/spurious
- */
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq &= 7;
-
- if (unlikely(realirq == 2)) {
- outb(0x0c, 0xa0);
- realirq = inb(0xa0);
-
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq = (realirq & 7) + 8;
- }
-
- /* mask and ack interrupt */
- cached_irq_mask |= 1 << realirq;
- if (unlikely(realirq > 7)) {
- inb(0xa1);
- outb(cached_slave_mask, 0xa1);
- outb(0x60 + (realirq & 7), 0xa0);
- outb(0x60 + 2, 0x20);
- } else {
- inb(0x21);
- outb(cached_master_mask, 0x21);
- outb(0x60 + realirq, 0x20);
- }
-
- spin_unlock_irqrestore(&i8259A_lock, flags);
-
- desc = irq_desc + realirq;
-
- /*
- * handle this 'virtual interrupt' as a Cobalt one now.
- */
- kstat_cpu(smp_processor_id()).irqs[realirq]++;
-
- if (likely(desc->action != NULL))
- handle_IRQ_event(realirq, desc->action);
-
- if (!(desc->status & IRQ_DISABLED))
- enable_8259A_irq(realirq);
-
- return IRQ_HANDLED;
-
-out_unlock:
- spin_unlock_irqrestore(&i8259A_lock, flags);
- return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
- .handler = piix4_master_intr,
- .name = "PIIX4-8259",
-};
-
-static struct irqaction cascade_action = {
- .handler = no_action,
- .name = "cascade",
-};
-
-
-void init_VISWS_APIC_irqs(void)
-{
- int i;
-
- for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
-
- if (i == 0) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_IDE0) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_IDE1) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_8259) {
- irq_desc[i].chip = &piix4_master_irq_type;
- }
- else if (i < CO_IRQ_APIC0) {
- irq_desc[i].chip = &piix4_virtual_irq_type;
- }
- else if (IS_CO_APIC(i)) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- }
-
- setup_irq(CO_IRQ_8259, &master_action);
- setup_irq(2, &cascade_action);
-}
diff --git a/arch/x86/kernel/traps_visws.c b/arch/x86/kernel/traps_visws.c
deleted file mode 100644
index e5e6492c2676..000000000000
--- a/arch/x86/kernel/traps_visws.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* VISWS traps */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/arch_hooks.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
- set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
- set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
- if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
- li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
- /*
- * On normal SMP PC this is used only with SMP, but we have to
- * use it and set it up here to start the Cobalt clock
- */
- set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
- setup_local_APIC();
- printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
- (unsigned int)apic_read(APIC_LVR),
- (unsigned int)apic_read(APIC_ID));
-
- set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
- set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
- printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
- co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
- /* Enable Cobalt APIC being careful to NOT change the ID! */
- co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
- printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
- co_apic_read(CO_APIC_ID));
-}
-
-int __init visws_trap_init_quirk(void)
-{
- lithium_init();
- cobalt_init();
-
- return 1;
-}
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index e19b91c47e90..5c715c24ab55 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -1,8 +1,22 @@
/*
- * Unmaintained SGI Visual Workstation support.
+ * SGI Visual Workstation support and quirks, unmaintained.
+ *
* Split out from setup.c by davej@suse.de
+ *
+ * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
+ *
+ * SGI Visual Workstation interrupt controller
+ *
+ * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
+ * which serves as the main interrupt controller in the system. Non-legacy
+ * hardware in the system uses this controller directly. Legacy devices
+ * are connected to the PIIX4 which in turn has its 8259(s) connected to
+ * a of the Cobalt APIC entry.
+ *
+ * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
+ *
+ * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
*/
-
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -25,6 +39,30 @@
#include <linux/init.h>
#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+#include <asm/visws/piix4.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+
char visws_board_type = -1;
char visws_board_rev = -1;
@@ -336,3 +374,334 @@ void __init visws_early_detect(void)
(visws_board_type == VISWS_540 ? "540" :
"unknown")), visws_board_rev);
}
+
+#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
+#define BCD (LI_INTB | LI_INTC | LI_INTD)
+#define ALLDEVS (A01234 | BCD)
+
+static __init void lithium_init(void)
+{
+ set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
+ set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
+
+ if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+ (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+ printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
+/* panic("This machine is not SGI Visual Workstation 320/540"); */
+ }
+
+ if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+ (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+ printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
+/* panic("This machine is not SGI Visual Workstation 320/540"); */
+ }
+
+ li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+ li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
+}
+
+static __init void cobalt_init(void)
+{
+ /*
+ * On normal SMP PC this is used only with SMP, but we have to
+ * use it and set it up here to start the Cobalt clock
+ */
+ set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+ setup_local_APIC();
+ printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+ (unsigned int)apic_read(APIC_LVR),
+ (unsigned int)apic_read(APIC_ID));
+
+ set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
+ set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
+ printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
+ co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
+
+ /* Enable Cobalt APIC being careful to NOT change the ID! */
+ co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
+
+ printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
+ co_apic_read(CO_APIC_ID));
+}
+
+int __init visws_trap_init_quirk(void)
+{
+ lithium_init();
+ cobalt_init();
+
+ return 1;
+}
+
+/*
+ * IRQ controller / APIC support:
+ */
+
+static DEFINE_SPINLOCK(cobalt_lock);
+
+/*
+ * Set the given Cobalt APIC Redirection Table entry to point
+ * to the given IDT vector/index.
+ */
+static inline void co_apic_set(int entry, int irq)
+{
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
+ co_apic_write(CO_APIC_HI(entry), 0);
+}
+
+/*
+ * Cobalt (IO)-APIC functions to handle PCI devices.
+ */
+static inline int co_apic_ide0_hack(void)
+{
+ extern char visws_board_type;
+ extern char visws_board_rev;
+
+ if (visws_board_type == VISWS_320 && visws_board_rev == 5)
+ return 5;
+ return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+ if (IS_CO_APIC(irq))
+ return CO_APIC(irq);
+
+ switch (irq) {
+ case 0: return CO_APIC_CPU;
+ case CO_IRQ_IDE0: return co_apic_ide0_hack();
+ case CO_IRQ_IDE1: return CO_APIC_IDE1;
+ default: return -1;
+ }
+}
+
+
+/*
+ * This is the SGI Cobalt (IO-)APIC:
+ */
+
+static void enable_cobalt_irq(unsigned int irq)
+{
+ co_apic_set(is_co_apic(irq), irq);
+}
+
+static void disable_cobalt_irq(unsigned int irq)
+{
+ int entry = is_co_apic(irq);
+
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+ co_apic_read(CO_APIC_LO(entry));
+}
+
+/*
+ * "irq" really just serves to identify the device. Here is where we
+ * map this to the Cobalt APIC entry where it's physically wired.
+ * This is called via request_irq -> setup_irq -> irq_desc->startup()
+ */
+static unsigned int startup_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
+ irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+ return 0;
+}
+
+static void ack_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ disable_cobalt_irq(irq);
+ apic_write(APIC_EOI, APIC_EIO_ACK);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static void end_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip cobalt_irq_type = {
+ .typename = "Cobalt-APIC",
+ .startup = startup_cobalt_irq,
+ .shutdown = disable_cobalt_irq,
+ .enable = enable_cobalt_irq,
+ .disable = disable_cobalt_irq,
+ .ack = ack_cobalt_irq,
+ .end = end_cobalt_irq,
+};
+
+
+/*
+ * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
+ * -- not the manner expected by the code in i8259.c.
+ *
+ * there is a 'master' physical interrupt source that gets sent to
+ * the CPU. But in the chipset there are various 'virtual' interrupts
+ * waiting to be handled. We represent this to Linux through a 'master'
+ * interrupt controller type, and through a special virtual interrupt-
+ * controller. Device drivers only see the virtual interrupt sources.
+ */
+static unsigned int startup_piix4_master_irq(unsigned int irq)
+{
+ init_8259A(0);
+
+ return startup_cobalt_irq(irq);
+}
+
+static void end_piix4_master_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip piix4_master_irq_type = {
+ .typename = "PIIX4-master",
+ .startup = startup_piix4_master_irq,
+ .ack = ack_cobalt_irq,
+ .end = end_piix4_master_irq,
+};
+
+
+static struct irq_chip piix4_virtual_irq_type = {
+ .typename = "PIIX4-virtual",
+ .shutdown = disable_8259A_irq,
+ .enable = enable_8259A_irq,
+ .disable = disable_8259A_irq,
+};
+
+
+/*
+ * PIIX4-8259 master/virtual functions to handle interrupt requests
+ * from legacy devices: floppy, parallel, serial, rtc.
+ *
+ * None of these get Cobalt APIC entries, neither do they have IDT
+ * entries. These interrupts are purely virtual and distributed from
+ * the 'master' interrupt source: CO_IRQ_8259.
+ *
+ * When the 8259 interrupts its handler figures out which of these
+ * devices is interrupting and dispatches to its handler.
+ *
+ * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
+ * enable_irq gets the right irq. This 'master' irq is never directly
+ * manipulated by any driver.
+ */
+static irqreturn_t piix4_master_intr(int irq, void *dev_id)
+{
+ int realirq;
+ irq_desc_t *desc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ /* Find out what's interrupting in the PIIX4 master 8259 */
+ outb(0x0c, 0x20); /* OCW3 Poll command */
+ realirq = inb(0x20);
+
+ /*
+ * Bit 7 == 0 means invalid/spurious
+ */
+ if (unlikely(!(realirq & 0x80)))
+ goto out_unlock;
+
+ realirq &= 7;
+
+ if (unlikely(realirq == 2)) {
+ outb(0x0c, 0xa0);
+ realirq = inb(0xa0);
+
+ if (unlikely(!(realirq & 0x80)))
+ goto out_unlock;
+
+ realirq = (realirq & 7) + 8;
+ }
+
+ /* mask and ack interrupt */
+ cached_irq_mask |= 1 << realirq;
+ if (unlikely(realirq > 7)) {
+ inb(0xa1);
+ outb(cached_slave_mask, 0xa1);
+ outb(0x60 + (realirq & 7), 0xa0);
+ outb(0x60 + 2, 0x20);
+ } else {
+ inb(0x21);
+ outb(cached_master_mask, 0x21);
+ outb(0x60 + realirq, 0x20);
+ }
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ desc = irq_desc + realirq;
+
+ /*
+ * handle this 'virtual interrupt' as a Cobalt one now.
+ */
+ kstat_cpu(smp_processor_id()).irqs[realirq]++;
+
+ if (likely(desc->action != NULL))
+ handle_IRQ_event(realirq, desc->action);
+
+ if (!(desc->status & IRQ_DISABLED))
+ enable_8259A_irq(realirq);
+
+ return IRQ_HANDLED;
+
+out_unlock:
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+ return IRQ_NONE;
+}
+
+static struct irqaction master_action = {
+ .handler = piix4_master_intr,
+ .name = "PIIX4-8259",
+};
+
+static struct irqaction cascade_action = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+
+void init_VISWS_APIC_irqs(void)
+{
+ int i;
+
+ for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+
+ if (i == 0) {
+ irq_desc[i].chip = &cobalt_irq_type;
+ }
+ else if (i == CO_IRQ_IDE0) {
+ irq_desc[i].chip = &cobalt_irq_type;
+ }
+ else if (i == CO_IRQ_IDE1) {
+ irq_desc[i].chip = &cobalt_irq_type;
+ }
+ else if (i == CO_IRQ_8259) {
+ irq_desc[i].chip = &piix4_master_irq_type;
+ }
+ else if (i < CO_IRQ_APIC0) {
+ irq_desc[i].chip = &piix4_virtual_irq_type;
+ }
+ else if (IS_CO_APIC(i)) {
+ irq_desc[i].chip = &cobalt_irq_type;
+ }
+ }
+
+ setup_irq(CO_IRQ_8259, &master_action);
+ setup_irq(2, &cascade_action);
+}
commit 0cecf92db84694cfed08329271e8ae6316e811eb
Author: Ingo Molnar <mingo@elte.hu>
Date: Thu Jul 10 16:20:32 2008 +0200
x86, VisWS: turn into generic arch, clean up
rename setup_visws.c to visws_quirks.c.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 08b7561cd5a9..2ef0fbd3488f 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -19,7 +19,7 @@ obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
obj-y += setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
-obj-$(CONFIG_X86_VISWS) += setup_visws.o traps_visws.o apic_visws.o
+obj-$(CONFIG_X86_VISWS) += visws_quirks.o traps_visws.o apic_visws.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
diff --git a/arch/x86/kernel/setup_visws.c b/arch/x86/kernel/visws_quirks.c
similarity index 100%
rename from arch/x86/kernel/setup_visws.c
rename to arch/x86/kernel/visws_quirks.c